Author Archives: Stamatopoulos & Associates L.T.D

MARGroDi Workshop (July 2015)

Posted on by

0


all images

A successful workshop was held in Athens, Greece. for the project «Novel methodologies for the assessment of risk of ground displacement» (MARGroDi), on July 13 at the ceremony hall of Harokopio University. About 100 scientists were invited and about 20 attended. Major Greek public agencies such as OASP (www.oasp.gr), IGME (www.igme.gr) and NOA (www.noa.gr) were represented in the workshop. The workshop schedule is given in table 1 below. The workshop was followed by very active discussion regarding the project achievements and the future applications of the project results.

Table 1. The workshop schedule
1. Introduction                                                 (SAA)
2 Geotechnical methods. multi-block method (SAA)
pumping method     (SAA)
3. Space methods                                           (HAR)
                  BREAK/DISCUSSION 10.50-11:25
6 Application at Thessaly a. Space methods   (HAR)
b. Geotechnical methods                                 (SAA)
7. Application at China a. Space methods       (HAR)

b. Geotechnical methods                                 (SAA)_
8. Risk methods Dr Dandoulaki

7th Panhellenic Conference on Geotechnical Engineering

Posted on by

0


Dynamic participation of Stamatopoulos & Association L.t.d at the 7th Panhellenic Conference on Geotechnical Engineering  (5-7 November 2014)

The MSc Civil Engineer   Lydia Balla presented four papers with titles:
1) “Displacement of slopes in the case of earthquake-induced loss of strength” (Μετακίνηση πρανών στην περίπτωση που ο σεισμός προκαλεί στατική αστάθεια)
2) “Prediction of seismic displacement of landslides with saturated sand using the multi-block and simplified constitutive equation” (πρόβλεψη της σεισμικής μετακίνησης ολισθήσεων σε κορεσμένη άμμο με την σπονδυλωτή προσομοίωση και απλοποιημένη καταστατική σχέση)
3) “Prediction of sand behavior along the sliding surface using constitutive equation” (καταστατική σχέση που προβλέπει την συμπεριφορά Άμμων σε επιφάνειες ολίσθησης)
4) “Use of displacement space measurements in geotechnical engineering: application at Κerasia slide” (Χρήση μετρήσεων μετακινήσεων απο το διάστημα στη γεωτεχνική μηχανική: εφαρμογή στην ολίσθηση της κερασιάς)
MSc Civil Engineer Petros Sidiropoulos presented:
1) “Effect of yield acceleration on sliding-block seismic displacement” (Η επίδραση της κρίσιμης επιτάχυνσης στην σεισμική μετακίνηση πρανών)
2) “Seismic move to slip surfaces by saturated sand with write-downs of resistance”

SERVICES

Posted on by

0


SAA provides full services of technological consultancy in all stages of Civil Engineering Projects, from feasibility study to the supervision and instrumentation of the behavior of the structure.

More specifically the services include:
-Evaluation of soil conditions suitability for construction
-Site investigation for discovery of suitable soil material for construction
-Boring and geophysical investigations
-Laboratory tests on soils, aggregates, asphaltic compounds and concrete
-Proposals on choice of foundation method and on soil improvement along with consideration of alternative solutions.
-Design-study of foundations,retaining works, road pavements and embankments
-Design-study of earth dams
-Seismic and microzonation studies
-Laboratory measurement of dynamic properties and liquefaction risk of soils
-Environmental Geotechnical Engineering
-Design-study of works for underground flow containment and of pressure dissipation works
-In-situ quality control of structures, construction materials, asphaltic compounds and concrete.
-Supervision of construction of geotechnical and related works.
-Instruments installation in earth structures and foundations and interpretation of readings.
-Examination of geotechnical failures and design of mitigation measures.
-Expertise evaluations
-Contract Documents or Technical Specifications
The company provides also consultancy services in the field of Maritime and Harbour Engineering. These, particularly include:
-Analysis of open sea wind and wave data
-Studies of wave propagation in shallow water
-Design of internal and external harbour works